Data Center Monitoring
Data Center Monitoring with MTX-Titan II-S
A data center is an installation of one or several rooms full of computers and electronic equipment which function as the server of company or an organization, whether it is public or private. These facilities, as well as their features and size, can vary. They can be from large buildings dedicated entirely to this function, to small rooms within the organization’s facilities. However, all of them have in common the need for constant monitoring, in real time and at different levels, to ensure the proper functioning of the equipment inside and that the conditions of the rooms are the most suitable for the maintenance of the devices.
Device: MTX-Router-Titan II-S, advanced industrial router with RS485, Modbus and Ethernet
Platform: IoT platform
Read more about this case study in the following link. 
Enter the “ethernet” or “modem” connection type:
For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks”).
For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem”).
The parameters for the servers to be configured are at least the following:
Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”.
The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files” for more details.
Wait. The concentrator will reboot using its factory configuration.
Esperar. El concentrador arrancará con su configuración de fábrica.
Warten Sie. Der Hub startet nach ein paar Augenblicken mit der Werkseinstellung neu.
Attendre. Le concentrateur va redémarrer avec sa configuration usine.
