EOS – AN5: MTX-Router-EOS management via SMS

Introduction

The MTX-Router EOS can be managed by sending SMS. This functionality allows the user to be able to carry out actions via SMS such as restarting, checking the coverage, connecting or disconnecting from the network or knowing the value of any router configuration parameter.

The SMS control configuration menu is found under « Serial and Remote Management »

Here we can create up to 16 rules with the actions we want to do.

In the Name field, we will assign the name we want,

In the phone Number field, we will write the phone number from which we want to execute the action or we will leave it blank if we want it to be executed from any number.

In the Action field, we have 4 different types of actions:

• Connect: For the router to connect to the data network
• Disconnect: For the router to disconnect from the data network
• Reboot: To reboot the router
• Executing: To execute some special request using the router’s nvram parameters

In the Content field, it will be the text that we will send in the SMS to execute each action

Some examples:

• Some examples of each action can be:

• Dissconnect: By sending the disconnection text the router will disconnect from the network:

• Reboot: By sending the text restart the router will restart:

• Executing: The text to be sent must follow the following format:
  GETNVTMP=name1,name2,name3;
  Where name1, name2, etc is the name of the nvram parameter. You can find the list of parameters at the end of the document in appendix 1. The CSQ command has also been implemented to see the signal quality:

Where when sending the command GETNVTMP = CSQ; , will return the current value of coverage:

Another example of this possibility would be
GETNVTMP=w1_wan_get_dns,csq,moimei,net_mode,simcops;

GETNVTMP=wan_ipaddr;

APPENDIX 1: NVRAM parameter list

Setup

Basic setup

WAN port setting

No.	parameter item	parameter	value, description		example
1	Connection type	wan_proto	disabled	disable	nvram set wan_proto=dhcp
			dhcp	Dhcp mode
			static	Static IP mode
			pppoe	Pppoe dial mode
			pptp	Pptp mode
			l2tp	l2tp mode
			3g	3g link-1 mode
			3glink	3g link-2 mode

4glink

No.	parameter item	parameter	value, description		example
1	username	ppp_username	63 bytes of longest character		nvram set ppp_username =card
2	password	ppp_passwd	63 bytes of longest character		nvram set ppp_passwd=card
3	Call center number	wan_dial	0	*99***1#	nvram set wan_dial=1
			1	*99#
			2	#99***1#
			3	#777
			4	*98*1#
4	APN	wan_apn	63 bytes of longest character		nvram set wan_apn=3gnet
5	PIN	wan_pin	Must be 4-byte number		nvram set wan_pin=1234
6	Network type selection	wan_conmode	0	auto	nvram set wan_conmode=0
			1	Enforce 3g
			2	Enforce 2g
			3	3g first
			4	2gfirst
			5	2g/3g Allow only
			6	Enforce 4g
			7	2g/3g/4g Allow only
7	Keep online mode	KpOnlineMode	1	None	nvram set KpOnline Mode=1
			2	Ping mode
			5	Route mode
			6	PPP mode
8	Keep online detection interval	KpOnlineInterval	Range 0-9999, in sec.		nvram set KpOnline Interval=60
9	keep online to detection the main server ip	KpOnlineIcmp Dest	Currently only support ip form,does not support domain form		nvram set KpOnlineIcmp Dest =8.8.8.8
10	Keep online to detection the second server ip	KpOnlineIcmp SecDest	Currently only support ip form,does not support domain form		nvram set KpOnlineIcmp SecDest =166.111.8. 238
11	Enable dial-up failed to restart mechanism	ppp_restartppp	0	disable	nvram set ppp_restartppp=1
			1	enable
12	Forced to reconnect	reconnect_enable	0	disable	nvram set reconnect_enable=1
			1	enable

Static IP

No.	parameter item	parameter	value, description		example
1	WAN IP address	wan_ipaddr	IP address form		nvram set wan_ipaddr =192.168.8.22
2	Subnet mask	wan_netmask	netmask		nvram set wan_netmask =255.255.255.0
3	gateway	wan_gateway	netmask		nvram set wan_netmask =192.168.8.1
4	Static DNS1 Static DNS2 Static DNS3	wan_dns	First DNS Second DNS Third DNS		nvram set wan_dns=”8.8.8.8 218.85.157.99 218.85.152.99” 3 DNS directly separated by spaces,should user quotation marks separated by a space framed
5	Keep online mode	KpOnlineMode	1	None	nvram set KpOnlineMode=1
			2	Ping mode
			5	Route mode
6	Keep online detection interval	KpOnlineInterval	Range 0-9999, in sec.		nvram set KpOnlineInterval=60
7	Keep online to detect main server ip	KpOnlineIcmpDest	Currently only support ip form,does not support domain form		nvram set KpOnlineIcmpDest =8.8.8.8
8	Keep online to detect second server ip	KpOnlineIcmpSecDest	Currently only support ip form,does not support domain form		nvram set KpOnlineIcmpSecDest =166.111.8.238

Note: number 5-8 only used in the version of the dual-card

 

DHCP mode

No.	parameter item	parameter	value, description		example
1	Keep online	KpOnlineMode	1	None	nvram set KpOnlineMode=1
			2	Ping mode
			5	Route mode
2	Keep online detection interval	KpOnlineInterval	Range 0-9999, in sec.		nvram set KpOnlineInterval=60
3	Keep online to detect main server ip	KpOnlineIcmpDest	Currently only support ip form,does not support domain form		nvram set KpOnlineIcmpDest =8.8.8.8
4	Keep online to detect second server ip	KpOnlineIcmpSecDest	Currently only support ip form,does not support domain form		nvram set KpOnlineIcmpSecDest =166.111.8.238

Note: number 1-4 only used in version of the dual-card

 

PPPoE

No.	parameter item	parameter	value, description		example
1	User	ppp_username	63 bytes of longest character		nvram set ppp_username=card
2	password	ppp_passwd	63 bytes of longest character		nvram set ppp_passwd=card
3	Server name	ppp_service	PPPoE server address, 63 character at the longest		nvram set ppp_service =172.16.1.1
4	PPP compress	ppp_compression	0	disable	nvram set ppp_compression=0
			1	enable
5	Compatible VDSL front demodulator	wan_vdsl	0	disable	nvram set wan_vdsl=0
			1	enable
6	VLAN 8 support	dtag_vlan8	0	disable	nvram set dtag_vlan8=0
			1	enable
7	MPPE encrypt	ppp_mppe	63 character at the longest		nvram set ppp_mppe= »mppe required »
8	Single-link multi-connected	ppp_mlppp	0	disable	nvram set ppp_mlppp=1
			1	enable
9	Keep online mode	KpOnlineMode	1	None	nvram set KpOnlineMode=1
			2	Ping mode
			3	Route mode
10	Keep Online detection interval	KpOnlineInterval	Range 0-9999, in sec.		nvram set KpOnlineInterval=60
11	Online to keep the detection of the main server ip	KpOnlineIcmpDest	Currently only support ip form,does not support domain form		nvram set KpOnlineIcmpDest =8.8.8.8
12	Online to keep the detection of the second server ip	KpOnlineIcmpSecDest	Currently only support ip form,does not support domain form		nvram set KpOnlineIcmpSecDest =166.111.8.238

Optional settings

No.	parameter item	parameter	value, description		example
1	Router name	router_name	39 characters at the longest		nvram set router_name=ROUTER
2	Host name	wan_hostname	39 characters at the longest		nvram set wan_hostname=XXX
3	Domain name	wan_domain	79 characters at the longest		nvram set wan_domain =XXX
4	MTU	mtu_enable	0	Auto mode	nvram set mtu_enable=1
			1	Manual mode
		wan_mtu	Digital of 0-9999 range		nvram set wan_mtu=1500

Local setting

No.	parameter item	parameter	value, description	example
1	Local ip address	lan_ipaddr	Ip address form	nvram set lan_ipaddr=192.168.1.1
2	Subnet mask	lan_netmask	LAN port subnet mask	nvram set lan_netmask=255.255.255.0
3	Gateway	lan_gateway	LAN port gateway	nvram set lan_gateway =0.0.0.0
4	Local DNS	sv_localdns	local DNS of lan port	nvram set sv_localdns=0.0.0.0

Network address server setting (DHCP)

No.	parameter item	parameter	value, description		example
1	DHCP type	dhcpfwd_enable	0	DHCP server	nvram set lan_ipaddr=192.168.1.1
			1	DHCP repeater
2	DHCP server	lan_proto	dhcp	Enable	nvram set lan_netmask=255.255.255.0
			static	disable
3	Start ip address	dhcp_start	Digital of range 1-254		nvram set lan_gateway =0.0.0.0
4	The maximum number of dhcp users	dhcp_num	Digital form,with a starting ip address,and should not be greater than 254		nvram set sv_localdns=0.0.0.0
5	Client lease time	dhcp_lease	Digital of range 0-99999, in minute		nvram set dhcp_lease =1440
6	Static DNS1 Static DNS2 Static DNS3	wan_dns	First DNS Second DNS Third DNS		nvram set wan_dns=”8.8.8.8 218.85.157.99 218.85.152.99” 3 DNSdirectly separated by spaces,encountered use quotation marks separated by a space framed
7	WINS	wan_wins	WIN server address		nvram set wan_wins=0.0.0.0
8	To use DNSmasq for dhcp	dhcp_dnsmasq	0	disable	nvram set dhcp_dnsmasq =1
			1	enable
9	To use DNSmasq for dhcp	dns_dnsmasq	0	disable	nvram set dns_dnsmasq =1
			1	enable
10	in dhcp standard	auth_dnsmasq	0	disable	nvram set auth_dnsmasq =1
			1	enable
11	DHCP forwarding server	dhcpfwd_ip	IP address form		nvram set dhcpfwd_ip=0.0.0.0

Dynamic DNS (DDNS)

No.	parameter item	parameter	value, description		example
1	DDNS service	ddns_enable	0	disable	nvram set ddns_enable =1
			1	DynDNS.org
			2	freedns.afraid.org
			3	ZoneEdit.com
			4	No-IP.com
			5	custom
			6	3322.org
			7	easyDNS.com
			8	TZO.com
			9	DynSIP.org
2	type	ddns_dyndnstype	1	dynamic	nvram set ddns_dyndnstype =1
			2	static
			3	custom
3	wildcard	ddns_wildcard	1	enable	nvram set ddns_wildcard =1
			other	disable
4	Do not use external ip detection	ddns_wan_ip	0	disable	nvram set ddns_wan_ip=1
			1	enable
5	Mandatory update interval	ddns_force	Digital of range 1-60, in days, the default is 10 days		nvram set ddns_force =10

DynDNS

No.	parameter item	parameter	value, description	example
1	Username	ddns_username	64 character at the longest	nvram set ddns_username =XXX
2	Password	ddns_passwd	3 character at the longest	nvram set ddns_passwd =XXX
3	Host name	ddns_hostname	Ddns host name of server	nvram set ddns_hostname =XXX

freedns

No.	parameter item	parameter	value, description	example
1	Username	ddns_username_2	64 character at the longest	nvram set ddns_username_2 =XXX
2	Password	ddns_passwd_2	3 character at the longest	nvram set ddns_passwd_2 =XXX
3	Host name	ddns_hostname_2	Ddns host name of server	nvram set ddns_hostname_2 =XXX

ZoneEdit

No.	parameter item	parameter	value, description	example
1	Username	ddns_username_3	64 character at the longest	nvram set ddns_username_3 =XXX
2	Password	ddns_passwd_3	3 character at the longest	nvram set ddns_passwd_3 =XXX
3	Host name	ddns_hostname_3	Ddns host name of server	nvram set ddns_hostname_3 =XXX

No-IP

No.	parameter item	parameter	value, description	example
1	Username	ddns_username_4	64 character at the longest	nvram set ddns_username_4 =XXX
2	Password	ddns_passwd_4	3 character at the longest	nvram set ddns_passwd_4 =XXX
3	Host name	ddns_hostname_4	Ddns host name of server	nvram set ddns_hostname_4 =XXX

Custom

No.	parameter item	parameter	value, description	example
1	User name	ddns_username_5	64 character at the longest	nvram set ddns_username_5=XX
2	Password	ddns_passwd_5	3 character at the longest	nvram set ddns_passwd_5=XXX
3	Host name	ddns_hostname_5	Ddns host name of server	nvram set ddns_hostname_5=XX
4	DYNDNS server	ddns_custom_5	DYNDNS server, can generally be got in the registered server	nvram set ddns_custom_5=XX
5	URL	ddns_url	The form of character	nvram set ddns_url=XX
6	DDNS additional options	ddns_conf	DDNS additional options	nvram set ddns_conf=XX

3322

No.	parameter item	parameter	value, description	example
1	Username	ddns_username_6	64 character at the longest	nvram set ddns_username_6=XX
2	Password	ddns_passwd_6	3 character at the longest	nvram set ddns_passwd_6=XXX
3	Host name	ddns_hostname_6	Ddns host name of server	nvram set ddns_hostname_6=XX
4	Type	ddns_dyndnstype_6	The default is dynamic,can not configuration

easyDNS

No.	parameter item	parameter	value, description		example
1	username	ddns_username_7	64 character at the longest		nvram set ddns_username_7=XX
2	Password	ddns_passwd_7	3 character at the longest		nvram set ddns_passwd_7=XXX
3	Host name	ddns_hostname_7	Ddns host name of server		nvram set ddns_hostname_7=XX
4	Wildcard	ddns_wildcard_7	1	enable	nvram set ddns_wildcard_7=1
			other	disable

TZO

No.	parameter item	parameter	value, description	example
1	Username	ddns_username_8	64 character at the longest	nvram set ddns_username_8=XX
2	Password	ddns_passwd_8	3 character at the longest	nvram set ddns_passwd_8=XXX
3	Host name	ddns_hostname_8	Ddns host name of server	nvram set ddns_hostname_8=XX

DynSIP

No.	parameter item	parameter	value, description	example
1	Username	ddns_username_9	64 character at the longest	nvram set ddns_username_9=XX
2	Password	ddns_passwd_9	3 character at the longest	nvram set ddns_passwd_9=XXX
3	Host name	ddns_hostname_9	Ddns host name of server	nvram set ddns_hostname_9=XX

Wireless

Basic setup

 

 

No.	parameter item	parameteR	value, description		example
1	Wireless network mode	wl0_net_mode	disabled	Disable	nvram set wl0_net_mode= mixed
			mixed	801.11b/n/g
			bg-mixed	801.11b/g
			b-only	801.11n
			g-only	801.11g
			ng-only	801.11g/n
			n-only	801.11n
2	Wireless mode	wl0_mode	ap	AP mode	nvram set wl0_mode=ap
			sta	Client mode
			infra	Adhoc mode
			apsta	Relay mode
			apstawet	Repeater bridge
3	Wireless network name (SSID)	wl0_ssid	32 character at the longest		nvram set wl0_ssid=”Matrix”
4	Wireless channel	wl0_channel	0	auto	nvram set wl0_channel=6
			1	2.412 GHz
			2	2.417 GHz
			3	2.422 GHz
			4	2.427 GHz
			5	2.432 GHz
			6	2.437 GHz
			7	2.442 GHz
			8	2.447 GHz
			9	2.452 GHz
			10	2.457 GHz
			11	2.462 GHz
			12	2.467 GHz
			13	2.472 GHz
5	Channel size	wl0_nbw	20	20MHz	nvram set wl0_nbw=20
			40	40MHz
6	Wireless ssid broadcast	wl0_closed	0	Enable	nvram set wl0_closed =0
			1	Disable
7	broadband	wl0_nctrlsb	upper	upper	nvram set wl0_ nctrlsb=upper
			lower	lower

Wireless security

No.	parameter item	parameter	value, description		example
1	Safe mode	wl0_security_mode	disabled	Disable	nvram set wl0_security_mode= psk
			psk	WPA Personal
			wpa	WPA Enterprise
			psk2	WPA2 Personal
			wpa2	WPA2 Enterprise
			psk psk2	WPA2 Personal Mixed
			wpa wpa2	WPA2 Enterprise Mixed
			wep	WEP
2	WPA algorithm	wl0_crypto	tkip	TKIP	nvram set wl0_crypto=TKIP
			aes	AES
			tkip+aes	TKIP+AES
3	WPA shared key	wl0_wpa_psk	Must be 8 63 ACSII character or 64 hexadecimal digits		nvram set wl0_wpa_psk =”123456789”
4	Key update interval (sec.)	wl0_wpa_gtk_rekey	default: 3600, range: 1 – 99999		nvram set wl0_wpa_gtk_rekey =3600
5	Radius authentication server address	wl0_radius_ipaddr	IP address format		nvram set wl0_radius_ipaddr =0.0.0.0
6	Radius authentication server port	wl0_radius_port	Digital of range 1-65535, default port is 1812		nvram set wl0_radius_port=1812
7	Radius authentication shared key	wl0_radius_key	79 characters at the longest		nvram set wl0_radius_key=XXX
8	Authentication type	wl0_authmode	open	Open	nvram set wl0_authmode=open
			shared	Shared key
9	Default transmit key	wl0_keywl0_key	1	1	nvram set wl0_key=1
			2	2
			3	3
			4	4
10	Encryption	wl0_wep_bit	64	64 bits 10 hex digits/5 ASCII	nvram set wl0_wep_bit=64
			128	128 bits 26 hex digits/13 ASCII
11	ASCII/HEX	wl0_wepmode	0	ASCII	nvram set wl0_wepmode=1
			1	HEX
12	Key 1	wl0_key1	10 hexadecimal		nvram set wl0_key1=0000000000
13	key 2	wl0_key2	10 hexadecimal		nvram set wl0_key2=0000000000
14	key 3	wl0_key3	10 hexadecimal		nvram set wl0_key3=0000000000
15	Key 4	wl0_key4	10 hexadecimal		nvram set wl0_key4=0000000000

NAT Configuration

No.	parameter item	parameter	value, description		example
1	Port forward	forward_spec	Name of application	Letters and numbers, 18 characters at the longest	nvram set forward _spec =”xx:on:both :12>192.168.1.1: 11<192.168.2.1/ 24 yy:off:tcp:12> 192.168.1.2:10 <192.168.3.1/24 “
			protocol	tcp, udp, both
			Whether to open	on:enable the rule
				off: disable the rule
			Source address of data	A.B.C.D/M
			Source port of data	1-65535
			Destination address of forward	A.B.C.D
			Destination port of forward	1-65535
			format: ”Name of application:protocol: destination port of data>Destination address of forward: Destination port of forward<source address of data next rule “…
2	Range of port forward	forward_port	Name of application	Letters and numbers, 18 characters at the longest	nvram set forward _port =”xx:on:udp: 1:2>192.168.7.2 yy:off:tcp:3:6>192. 168.7.3 “
			Whether to open	on: enable
				off: disable
			protocol	udp, tcp, both
			Starting destination port of data	1-65535
			The end of destination port of data	1-65535
			Destination port of forward	A.B.C.D
			format: ”application:protocol: destination port of data>Destination address of forward: Destination port of forward<source address of data next rule “…
3	Port trigger	port_trigger	Name of application	Letters and numbers 18 characters at the longest	nvram set port_trigger = “zzz:on:tcp:2-555> 6-666 ttt:on:both:5-66 >88-9099 yyy:on:udp :2-555>6-666 ttt:on: both:5-66>88-9099”
			Whether to open	on: enable
				off: disable
			protocol	tcp, udp,both
			Starting port number of destination port range Of Trigger rule	1-65535
			The end of port number of destination port range Of Trigger rule	1-65535
			Starting port number of port range Of Trigger rule	1-65535
			The end of port number of port range Of Trigger rule	1-65535
			format: ”Name of application:protocol:Starting port number of destination port range Of Trigger rule: The end of port number of destination port range Of Trigger rule>Starting port number of port range Of Trigger rule:The end of port number of port range Of Trigger rule;next rule “…
4	enable DMZ	dmz_enable	0	Disable DMZ	nvram set dmz_enbale=1
			1	Enable DMZ
5	DMZ host ip address	dmz_ipaddr	1-254		Nvram set dmz_ipaddr=23

Application

Serial port application

No.	parameter item	parameter	value, description		example
1	Serial port application	ser_app_en	0	disable	nvram ser_app_en=0
			1	enable
2			4	2400	nvram set ser_baudrate1 =10
			5	4800
			6	9600
			7	19200
			8	38400
			9	57600
			10	115200
3	Data-bits	ser_databit1	1	8 digit	nvram ser_databit1=1
			2	7 digit
			3	6 digit
4	Stop-bit	ser_stopbit1	1	1 digit	nvram set ser_stopbit1=1
			2	2 digit
5	inspect	ser_parity1	1	none	nvram set ser_parity1=1
			2	Odd parity
			3	Even parity
6	Fluid control	ser_flowcontrol1	1	none	nvram set ser_flowcontrol1=1
			2	hardware
			3	software
7	Protocol type	ser_submodesw	1	UDP(DTU)	nvram set ser_submodesw =1
			2	Pure UDP
			3	TCP(DTU)
			4	Pure TCP
			5	TCP server
			6	TCST
8	Server address	ser_remoteip	a form of IP address or domain name		nvram set ser_remoteip =120.42.46.98
9	Server port	ser_remoteport	decimal figures of 1-65535 range		nvram set ser_remoteport =5501
10	Equipment number	ser_dtuid	Digital format,13 byte at the longest		nvram set ser_dtuid =12345678910
11	Equipment ID	ser_dtudeviceid	Digital format, must be 8 digit,otherwise an error		nvram set ser_dtudeviceid =12345678
12	Heartbeat interval	ser_onlnrptintvl	decimal figures of 1-99999 range		nvram set ser_onlnrptintvl =60
13	Listening port	ser_tcpsvr_listen_port	decimal figures of 1-65535 range		nvram set ser_tcpsvr_listen_port =6666
14	Custom heartbeat packets	ser_tcp_custom_hrt	A maximum of 50 bytes		nvram set ser_tcp_custom_hr t=XXX
15	Custom registration package	ser_tcp_custom_reg	A maximum of 50 bytes		nvram set ser_tcp_custom_reg =XXX

Management

Management

NO.	parameter item		parameter	value, description		EXAMPLE
1	protocol	HTTP	http_enable	1	enable	nvram set http_enable=1
				other	disable
		HTTPS	https_enable	1	enable	nvram set https_enable=0
				other	disable
2	Auto refresh (sec.)		refresh_time	decimal figures of 1-99 range		nvram set refresh_time =3
3	Display system information page before landing		status_auth	1	enable	nvram set status_auth =1
				0	disable
4	Password protection of system information page		info_passwd	1	enable	nvram set info_passwd =0
				other	disable
5	Web interface management		remote_management	1	enable	nvram set remote_management =0
				0	disable
6	Use HTTPS		remote_mgt_https	1	enable	nvram set remote_mgt_https=0
				other	disable
7	Web interface port		http_wanport	decimal figures of 1-65535 range		nvram set http_wanport =8088
8	SSH management		remote_mgt_ssh	0	disable	nvram set remote_mgt_ssh=1
				1	enable
9	SSH remote port		sshd_wanport	decimal figures of 1-65535 range		nvram set sshd_wanport =22
10	Telnet management		remote_mgt_telnet	0	disable	nvram set remote_mgt_telnet =0
				1	Enable
11	language		language	chinese_simplified	chinese	nvram set language=english
				english	english

Remain active

no.	parameter item		parameter	value, description		example
1	Timer switch		schedule_bs_enable	1	enable	Nvram set schedule_bs_enable=0
				0	disable
2	matching		schedule_mode	1	Day of month	nvram set schedule_mode=1
				2	Week of month
				3	period of time a month
				4	period of time a week
3	Off time	hour	shutdown_hours	decimal figures of 0-23 range		nvram set shutdown_hours=0
		minute	shutdown_minutes	decimal figures of 0-59 range		nvram set shutdown_minutes=0
4	Shutdown date	Start day of month	shutdown_day	0-31 range, 0 is everyday		nvram set shutdown_day=0
		End day of month	shutdown_day_e	decimal figures of 1-31 range		nvram set shutdown_day_e=1
		Start day of week	shutdown_week	*	Every day	nvram set shutdown_week=0
				0	sunday
				1	monday
				2	thesday
				3	wednesday
				4	thursday
				5	friday
				6	saturday
		Weeks after the end of days	shutdown_week-_e	decimal figures of 0-6 range		nvram set shutdown_week_e=0
5	Boot time	hour	boot_hours	decimal figures of 0-23 range	nvram set boot_hours=0	nvram set ser_parity1=1
		minute	boot_minutes	decimal figures of 0-59 range	nvram set boot_minutes=0	nvram set boot_minutes=0
6	Boot date	Start day of month	boot_day	0-31 range, 0 is everyday		nvram set boot_day=0
		End day of month	boot_day_e	decimal figures of 1-31 range		nvram set boot_day_e=1
		start day of week	boot_week	*	Weekday	nvram set boot_week=0
				0	sunday
				1	monday
				2	tuesday
				3	wednesday
				4	thursday
				5	friday
				6	saturday
		The end of week day	boot_week¬_e	decimal figures of 0-6 range		nvram set boot_week_e=0
7	Scheduled reboot		schedule_enable	1	enable	nvram set schedule_enable =0
				0	disable
8	Scheduled reboot options		schedule_hour_time	1	Interval mode	nvram set schedule_hour_time=1
				2	Set the time mode
9	interval (sec.)		schedule_time	decimal figures of 60-99999 range		nvram set schedule_time =3600
10	At the set time	hour	schedule_hours	decimal figures of 0-23 range		nvram set schedule_weekdays=00
		minute	schedule_minutes	decimal figures of 0-59 range
		week	schedule_weekdays	*	everyday
				00	sunday
				01	monday
				02	tuesday
				03	wednesday
				04	thursday
				05	friday
				06	saturday