Legal Notice

Legal information

– This site is published by : Webdyn, a simplified joint stock company with a share capital of €570,302.00, registered with the Versailles Trade and Companies Register under number 414 834 028 000 222, whose registered office is located at 24-26, rue des Gaudines, 78100 Saint Germain en Laye – France, intra-community VAT number FR 50 414 834 028.

– Responsible for the publication of the website: José María Vilallonga Presas in his capacity as President of Webdyn. For any information, you can contact Priscillia Colléaux, Communication and Marketing Manager at marketing@webdyn.com.

– The website host is OVH. Storage is provided by OVH, whose head office is located at OVH, 2 Rue Kellermann, 59100 Roubaix – France. Website: www.webdyn.com.

– For any information or advice, you can contact us by e-mail at contact@webdyn.com or by telephone on 01 39 04 29 40 from Monday to Friday from 9am to 12pm and from 1pm to 6pm.

– You can report any inappropriate or illegal content to us at the following address: marketing@webdyn.com. Please note that no questions relating to the products and services offered for sale, the follow-up of your order or requests relating to the after-sales service of your products will be answered at this address.

Terms of use of the site

Services provided

All of the company’s activities and information are presented on our website www.webdyn.com.

Webdyn endeavours to provide information on the www.webdyn.com website that is as accurate as possible. The information on the www.webdyn.com website is not exhaustive and the photos are not contractual.

They are given subject to modifications having been made since they were put on line. Furthermore, all information on the www.webdyn.com website is given as an indication and is likely to change or evolve without notice.

This site (www.webdyn.com) is available in various web languages (HTML, HTML5, Javascript, CSS, etc.) for greater ease of use and more pleasant graphics.

We recommend that you use modern browsers such as Internet Explorer, Safari, Firefox, Google Chrome, etc.

Webdyn makes every effort to provide reliable information and updates to its website.

However, errors or omissions may occur. The user must therefore ensure the accuracy of the information provided by Webdyn, and report any changes to the site that he/she deems useful. Webdyn is in no way responsible for the use made of this information, and for any direct or indirect prejudice that may result from it.

Hyperlinks and cookies

The www.webdyn.com website may ask you to accept cookies for statistical and display purposes. A cookie is a piece of information placed on your hard drive by the server of the site you are visiting.

It contains several pieces of data that are stored on your computer in a simple text file that a server accesses to read and record information. Some parts of this site cannot be operated without accepting cookies.

The websites may offer links to other websites or other resources available on the Internet. Webdyn has no means of controlling the sites linked to its websites.

Webdyn is not responsible for the availability of such external sites and sources, nor does it guarantee them. It cannot be held responsible for any damage of any kind resulting from the content of these external sites or sources, and in particular from the information, products or services they offer, or from any use that may be made of these elements. The risks associated with this use are fully incumbent on the Internet user, who must comply with their conditions of use.

Users, subscribers and visitors to the websites may not set up a hyperlink to this site without the express prior authorisation of Webdyn.

In the event that a user or visitor wishes to set up a hyperlink to one of Webdyn’s websites, he or she must send an email to the website to request the setting up of a hyperlink.

Webdyn reserves the right to accept or refuse a hyperlink without having to justify its decision.

Contractual limitations on data

The information on this site is as accurate as possible and the site is updated at various times of the year, but may contain inaccuracies or omissions.

If you notice a gap, error or what appears to be a malfunction, please report it by e-mail to marketing@webdyn.com, describing the problem as precisely as possible (page causing the problem, type of computer and browser used, etc.).

Any content downloaded is done at the user’s own risk and under his sole responsibility. Consequently, Webdyn cannot be held responsible for any damage to the user’s computer or for any loss of data resulting from the download.

Furthermore, the user of the site undertakes to access the site using recent, virus-free equipment and with a last generation updated browser.

Webdyn cannot be held responsible for the hypertext links set up within the framework of this website to other resources on the Internet.

Intellectual property

All the content of the present site www.webdyn.com, including, but not limited to, graphics, images, texts, videos, animations, sounds, logos, gifs and icons, as well as their layout, are the exclusive property of the company, with the exception of trademarks, logos or content belonging to other partner companies or authors.

Any reproduction, distribution, modification, adaptation, retransmission or publication, even partial, of these different elements is strictly forbidden without the express written consent of Webdyn. This representation or reproduction, by any means whatsoever, constitutes an infringement sanctioned by articles L.335-2 and following of the Intellectual Property Code. Failure to comply with this prohibition constitutes an infringement that may incur the civil and criminal liability of the infringer. In addition, the owners of the copied Content may take legal action against you.

Declaration to the CNIL

In accordance with Law 78-17 of 6 January 1978 (amended by Law 2004-801 of 6 August 2004 on the protection of individuals with regard to the processing of personal data) relating to information technology, files and freedoms, this site has been declared to the National Commission for Information Technology and Freedoms (www.cnil.fr) as 1656629.

Disputes and applicable law

The present conditions of the www.webdyn.com website are governed by French law and any dispute or litigation that may arise from the interpretation or execution of these conditions will be under the exclusive jurisdiction of the courts on which the company’s registered office depends. The reference language for the settlement of any disputes is French.

Personal data

Data protection 

In Europe, personal data is protected in particular by Law No. 78-87 of 6 January 1978, Law No. 2004-801 of 6 August 2004, Article L. 226-13 of the Criminal Code and the European Directive of 24 October 1995 and the General Regulation on the Protection of Personal Data (RGPD) of 14 April 2016 (No. 2016/679).

In general, you are not required to provide us with your personal data when you visit our website www.webdyn.com.

However, there are some exceptions to this principle. Indeed, for certain services offered by our site, you may be required to communicate certain data to us such as: your name, your position, the name of your company, your e-mail address and your telephone number. This is the case when you fill in the form offered online, in the “contact” section.

The information collected on this form is recorded in a computer file used by the marketing and sales department to respond to your requests for information and quotes and to send you information from Webdyn (emailing, newsletter, etc.).

The data collected will be communicated only to the following recipients: marketing and sales departments.

You can access your data, rectify it, request its deletion or exercise your right to limit the processing of your data. You may withdraw your consent to the processing of your data at any time.

Visit cnil.fr for more information on your rights.

To exercise these rights or if you have any questions about the processing of your data under this scheme, you can contact the marketing department at marketing@webdyn.com, 01 39 04 29 40.

If, after contacting us, you feel that your “Data Protection” rights have not been respected, you may submit a complaint to the CNIL.

Obtaining data and purpose of the treatment

The collection of personal data is done through our contact page and every page with a form and the emails that customers can send to contact@webdyn.com when they request our services.

Webdyn will treat the user’s data for the following specific purposes:

– Management of product and/or service requests

– Information services to clients or future clients

– Customer support and technical support services

– Collection management to clients

– Contribute to the strategic development of the business

– Control the use made of the website

Legitimation

The legal basis for the processing of your data is based on your express consent and on the need to execute the contracts whose purpose is the Webdyn and MTX products and/or services that you contract. The completion of the form included in the site or the sending of emails or other communications to the owner of the website implies the express consent of the Applicant to the inclusion of their personal data in the aforementioned automated file.

Profesional secret

All private communications between Webdyn and customers/users will be considered confidential. We recommend that the Applicant not provide any third party with their reference numbers if any provided by Webdyn.

Assignment to third party

Webdyn does not sell, assign, lease or transmit in any way information or personal data of its customers/users or third parties.

Rights

The user may, at any time and for free, exercise their rights of access, rectification or deletion, opposition, limitation and portability of their data, through the postal address or email of Webdyn above, under the terms established in the current regulations.

In any case, the user is informed that, if he considers that Webdyn has infringed, or has been able to violate the rights that are recognized by the applicable data protection regulations, he may submit a claim to the Control Authority corresponding: Spanish Agency for Data Protection.

Revocation of consent

When the processing of your data is based on your consent and does not affect data that is necessary for the performance of a contract with the interested party, the user’s acceptance that their data can be processed or transferred will always be revocable, without retroactive effects . In order to revoke this consent, users may contact MTX M2M through the following channels: [specify the different means through the postal address or email of MTX M2M indicated above.

Data conservation period

Webdyn will keep the personal data of the users only during the time necessary for the realization of projects, sales or partnership.

Credits

Webdesign and technical implementation: Mentalworks digital agency
Photos: Webdyn, Fotolia, Pexel, Thinkstock
Editorial content: Webdyn
Host: OVH 2 Rue Kellermann, 59100 Roubaix – France

Appendices and other documents

Annexes et autres documents

Appendices and other documents

Appendices and other documents

Appendices and other documents

Appendices and other documents

Appendices and other documents

Appendices and other documents

Appendices and other documents

Product End of Life cycle

FAQ

No, the concentrator is not able to decrypt data from WM-BUS equipment because it does not have a safe on board to guarantee the security of the encryption keys of your equipment. The recovered data is deposited without modification (without decryption) by the concentrator on your remote server.
Please check these items in this order:
  • the battery level: if the battery level is too low or empty, the product will not run properly or not run at all.
  • Modem reception level: a bad signal at the modem may also prevent the hub from uploading files. Look to move the product or install an external antenna to improve signal quality.
  • The last configuration file: a bad configuration file can block the product.

Remotely, by checking the regularly uploaded files if the product configuration is correct.

On site, by passing the magnet over the product, you will hear 3 short beeps.

Replace the product and inject the configuration from the old product into the new one. If a white list is used, remember to inject it into the new product as well.

Appendices and other documents

Other manuals

Application Notes

Product End of Life Cycle

FAQ

Gateway configuration:

Start by checking that the computer’s IP parameters are compatible with the WebdynSunPM IP address (by default 192.168.1.12)

Launch a web browser (Chrome, Firefox, Edge, Safari, etc.) and enter the WebdynSunPM concentrator IP address in the address bar. An authentication page is displayed:

The default accesses are:

IdentifiantMot de passe
userhighhigh

Click “Login”

There are two configuration solutions, using the web interface and using text messages:
  • Configuration using the web interface:
Start by establishing a connection to the concentrator by connecting to it to access the server configuration: Enter the “ethernet” or “modem” connection type: For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks). For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem). The parameters for the servers to be configured are at least the following: Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”. The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files for more details.
  • Text message configuration:
Text message configuration requires sending the following commands:
      • Apn: to configure the SIM card APN. (see section 3.2:“apn” modem configuration command)
      • Ftp: to configure the FTP server that will contain the concentration configuration (see section 3.3: “ftp” FTP configuration command”).
      • Connect: to launch the connection to the FTP server and load the configuration (see section 3.1: ““connect” connection command

Access to the FTP server depends on the selected solution.

If you have chosen a portal, it will give you the FTP server access identifiers.

If you want to use your own FTP server, contact your network administrator.

For all other configurations, and to determine the best solution, contact the Webdyn sales department which will advise you and direct you to the relevant contacts: contact@webdyn.com

General gateway use

There are 2 methods to force a concentrator factory reset:
  • Press the Factory Reset button on the concentrator for 20 seconds:
Wait. The concentrator will reboot using its factory configuration.
  • If a SIM card is installed and configured, a “factory” text message can also be used for factory reset. Just send the “factory” text message to the SIM card phone number (see section 3.7: “factory” reset command”)

It is possible to send commands to connected devices if they accept them.

The WebdynSunPM can store up to 50Mb of uncompressed data per declared device.

If there is no access to the remote server, the WebdynSunPM concentrator can store the data for several months.

The maximum data storage time varies depending on the amount of data to be collected and the configured collection frequency.

The average storage time varies from 3 to 4 months.

The average service life of the battery is 5 years.

It may vary depending on the installation environment.

All our products are guaranteed for 2 years.

For more information, read the general terms and conditions of sale.

The data volume depends on the exchanged files.

The average is about 5 MB per month but this varies from one installation to another.

Inverter compatibility

See section 1.4: “Supported devices”.

Modbus device compatibility:

Yes, different Modbus devices can be connected to the same serial port.

Device compatibility:

    • Same type of RS485 or 4 wire connection.
    • All devices should be able to be configured using identical bus specifications. Same speed, same parity, same number of stop bits and data bits on all devices and on the WebdynSunPM.
    • Each device must be assigned a unique Modbus address (between 1 and 247) on the bus. (UnitID)

Appendices and other documents

Product End of Life Cycle

FAQ

CONFIGURATION OF THE WEBDYNSUN GATEWAY

  • Start by checking that your computer’s IP parameters are compatible with the WebdynSun’s “IP” address (the default is 192.168.1.12). 
  • Next, launch a web browser (Firefox or IE) and enter the WebdynSun’s IP address in the address bar. An authentication page will appear: 

The default accesses are:
Username: userhigh
Password: high

  • Click on “log in”  

There are two types of configuration: via the web interface or via SMS.

Configuration of the web interface:

1/ Go to the configuration page with the gateway IP address (default 192.168.1.12)

2/ Go to the Configuration tab.

3/ Select either the Ethernet or modem connection mode:

If connecting via the local network (Ethernet):

  • Edit the WebdynSun’s IP parameters by assigning it a network-compatible address.

Please note, all fields must be completed in accordance with the configuration of your local network.

If connecting via the GPRS network (Modem):

  • Change the connection settings of the GPRS modem to the settings provided by your mobile operator.

4/ Edit the FTP server parameters.

5/ Confirm the changes.

6/ Restart the WebdynSun gateway using the new settings.

7/ In the menu, click on the “installation” tab, followed by the “connection” sub-tab and start the connection.

Configuration via SMS:

This configuration method requires the use of an active SIM card with a data option and a pin code that must be either “0000” or disabled.
The SIM card must be inserted into the unit before connection to the mains supply.
After connection to the mains supply, send the following SMS messages to the number of the previously inserted SIM card:

SMS for configuring the APN:
After replacing the generic fields with those of your operator, send the following SMS*:
apn=apn_name;usr=user_name;pwd=password;

Replace the above SMS fields with the following information:

  • apn_name: APN name supplied by your mobile operator
  • user_name: APN ID supplied by your mobile operator
  • password: APN password supplied by your mobile operator

SMS for FTP configuration:
After replacing the generic fields with those of your FTP server, send the following SMS*:
Ftp=server_name:user_name:password:port;

Replace the above SMS fields with the following information:

  • server_name: FTP server address
  • user_name: FTP account ID
  • Password: FTP account password
  • Port: FTP server port (the default port is 21)

Connection SMS:

Send the word “connect” by SMS* to launch a connection to the FTP server

*Please note: the formatting of the SMS must be exactly identical to that shown above (e.g.: no spaces between characters, etc.)

There are 2 ways of resetting the gateway.

  • If connecting by Ethernet:
    • Disconnect from the mains
    • Remove the cover
    • Disconnect the battery
    • Put the DIP Switch 2 on the WebdynSun card in “ON” position
    • Start the WebdynSun by connecting it only to the mains power supply
    • Wait until all the LEDs flash and then stop flashing (3 to 5 mins).
    • Disconnect from the mains
    • Reset the Dip Switch 2 to “OFF” 
    • Reconnect the battery
    • Reconnect to the mains supply and the WebdynSun starts normally.
  • If there is a SIM card inserted in the unit:
    • Send an SMS message containing the word “factory” to the number of the inserted SIM card.

NB : Resetting the gateway restores the configuration to its original state. Please note: data will be saved but the specific settings will not. Therefore, all the settings must be reconfigured.

Commands can be sent to connected devices with the exception of certain inverters and Modbus slaves that do not accept write requests.

If the device allows it, command files can be created on the FTP server.

The WebdynSun has a memory of about 100MB.

Therefore, if the remote server cannot be accessed, the WebdynSun gateway can backup data for several months.
The maximum data backup time varies depending on the amount of data to be collected.

The average backup time ranges from 3 to 4 months.

The average battery life is 5 years.

It may vary depending on the installation environment.

Yes, data may be sent to a PLC if the latter is equipped with a Modbus protocol.
The “Report” configuration file allows the WebdynSun gateway to automatically write the values read on a Modbus slave

All our products are guaranteed for 2 years.

For further information, please see our general conditions of sale.

Files uploaded by the WebdynSun gateway are compressed in Gz format.

The data contained in these files is structured in csv format.

The data volume depends on the files exchanged.

The average is about 5 MB per month but this varies from one installation to another.

INVERTER COMPATIBILITY WITH THE WEBDYNSUN GATEWAY

Different brands of inverter may be connected to the RS485(B) port or via the Ethernet port if the inverter protocol is based on the Modbus protocol (RTU or TCP).

However, different brands of inverters cannot be connected to the same RS485(A) port.

For a list of compatible inverters, please see the product page of the WebdynSun data gateway
  • Check if the correct inverter protocol is selected before starting detection:
  • Check the wiring and configuration of the inverters by referring to the inverter appendices.
  • Check that the inverters are not in OFF or stand-by mode.
  • Check that the line end plugs on the RS 485(A) Bus are turned on.

COMPATIBILITY WITH MODBUS DEVICES

Yes, any device you wish to connect must be configured and its Modbus definition file must be created.

The configuration is mainly based on the RS485 serial bus parameters and the IP parameters.

Yes, different Modbus devices can be connected to the same RS485 (B) port.

However, they must have the same communication parameters (bus parameters or compatible IP parameters), in order for them to communicate with each other.

Appendices and other documents

Appendices and other documents

Appendices and other documents

Appendices and other documents

Appendices and other documents

  • Warning – Firmware update V4.07.02 For the old version with SIM CARD of the pin code is 0000 you can update in this version. For the second case : When you insert a SIM CARD with pin code is 0000 used in this version (4.07.02) Downgrading to a previous version is not permitted.


PRODUCT END OF LIFE CYCLE

Appendices and other documents

  • Warning – Firmware update V4.07.02 – For the old version with SIM CARD of the pin code is 0000 you can update in this version.

    For the second case : When you insert a SIM CARD with pin code is 0000 used in this version (4.07.02) Downgrading to a previous version is not permitted.

PRODUCT END OF LIFE CYCLE

Annexes and other documents

FAQ

Annexes and other documents

FAQ

Annexes and other documents

FAQ

Annexes and other documents

FAQ

CONFIGURATION OF THE WEBDYNRF GATEWAY

  • If the file is deleted from the directory after connecting the WebdynRF gateway, the problem is usually due to a file format error. The configuration and control files must follow the format described in the schema (XSD) files. To check schema consistency, open the XML file with the Notepad++ text editor and install the “XML Tool” add-on. Next, copy the corresponding XSD file to the XML file in the same directory, and select “Validate now” in XML Tool. Errors detected by the tool should be displayed.
  • If the file is not deleted from the server, the most common problem is that the file has not been located correctly. The file must be available on the server in the “INBOX” directory and in the sub-directory bearing the product UID name (e.g.: “/INBOX/0045CE/”).

GENERAL USE OF THE WEBDYNRF GATEWAY

The amount of data exchanged on the GPRS network varies depending on the configuration. However, the average consumption would be about 5MB / month.
The WebdynRF gateway consumes an average of about 250mA.

There are 2 firmware updating methods:
Local updating:
On the WebdynRF configuration interface, go to the “Actions” tab and select the updater in the “File upload” menu before clicking on the “Upload” button

Remote updating:
Upload the file containing the updater (file with extension “.bz2”) in the “BIN” directory to the FTP server . Next, place the update command in the INBOX directory corresponding to your gateway (“INBOX/”, with, the identifier of the gateway concerned)

The update command must follow the following format:

      updater.tar.bz2
      checksum_md5

updater.tar.bz2
checksum_md5

With:

  • updater.tar.bz2: Updater file name uploaded to the “BIN” directory
  • checksum_md5: Md5 code of the updater file

A lack of connection to the FTP server may be due to a network connection problem (Ethernet or GPRS), an FTP login problem or a failure to initiate the connection.

If you cannot connect to the network, check the following points:

  • Ethernet:
    • Modem set to “off” or “always off”
    • “Gateway” fields correctly entered
    • At least one DNS server must be configured
  • GPRS:
    • Modem set to “on”
    • APN, APN ID and APN password correctly entered
    • GPRS call number set to “*99***1#”

If you cannot log in, check the following points:

  • Incorrect FTP parameters
  • TCP port 21 closed at output
  • Domain name resolution problem: the DNS server is not specified

If the connection fails to initiate:

In this case, only the automatic connection does not work. The problem is probably caused by an incorrect schedule configuration. Please note, the schedule ID must be an integer.

 PARTICULAR APPLICATION OF THE WEBDYNRF WIRELESS M-BUS GATEWAY

For the WM-bus module data to be transmitted, you must:

  • Choose the mode corresponding to the modules used (S, T or N)
  • Define the modules or groups of modules to be processed

A module may be defined in a unique way by all the fields below:

  • Id
  • Manufacturer
  • Version
  • Medium

If a module’s data is encrypted, the encryption key for this module can be defined in the “Key” field.

To simplify the entry of the modules to be processed, a module group can be defined that conforms to the fields entered. The other fields will then be left empty (below is an example of a configuration for retrieving all Webdyn manufacturer (WDN) modules with the encryption key “00000000000000000000000000000000”.

  •   Id :
  •   Manufacturer : WDN
  •   Medium :
  •   Version :
  •   Label : Webdyn
  •   Key : 00000000000000000000000000000000

Note: In order for the modules (filters) entered to be taken into account, the “ByPass filter” mode must be deactivated.

Click here to read the media file 

Click here to read the units file 

 PARTICULAR APPLICATION OF THE WEBDYNRF WAVENIS

The tool is connected to the gateway via the installer access (install).

It is therefore necessary to use the installer password (default is “middle”), and not the administrator’s password (default is “high”)

The statuses transmitted by the WebdynRF gateway are the raw values contained in the Wavenis modules. They are transmitted without interpretation. For further details, please refer to the Coronis module manuals.

Appendix and other documents

FAQ

CONFIGURATION OF THE WEBDYNRF GATEWAY

  • If the file is deleted from the directory after connecting the WebdynRF gateway, the problem is usually due to a file format error. The configuration and control files must follow the format described in the schema (XSD) files. To check schema consistency, open the XML file with the Notepad++ text editor and install the “XML Tool” add-on. Next, copy the corresponding XSD file to the XML file in the same directory, and select “Validate now” in XML Tool. Errors detected by the tool should be displayed.
  • If the file is not deleted from the server, the most common problem is that the file has not been located correctly. The file must be available on the server in the “INBOX” directory and in the sub-directory bearing the product UID name (e.g.: “/INBOX/0045CE/”).

GENERAL USE OF THE WEBDYNRF GATEWAY

The amount of data exchanged on the GPRS network varies depending on the configuration. However, the average consumption would be about 5MB / month.
The WebdynRF gateway consumes an average of about 250mA.

There are 2 firmware updating methods:
Local updating:
On the WebdynRF configuration interface, go to the “Actions” tab and select the updater in the “File upload” menu before clicking on the “Upload” button

Remote updating:
Upload the file containing the updater (file with extension “.bz2”) in the “BIN” directory to the FTP server . Next, place the update command in the INBOX directory corresponding to your gateway (“INBOX/”, with, the identifier of the gateway concerned)

The update command must follow the following format:

      updater.tar.bz2
      checksum_md5

updater.tar.bz2
checksum_md5

With:

  • updater.tar.bz2: Updater file name uploaded to the “BIN” directory
  • checksum_md5: Md5 code of the updater file

A lack of connection to the FTP server may be due to a network connection problem (Ethernet or GPRS), an FTP login problem or a failure to initiate the connection.

If you cannot connect to the network, check the following points:

  • Ethernet:
    • Modem set to “off” or “always off”
    • “Gateway” fields correctly entered
    • At least one DNS server must be configured
  • GPRS:
    • Modem set to “on”
    • APN, APN ID and APN password correctly entered
    • GPRS call number set to “*99***1#”

If you cannot log in, check the following points:

  • Incorrect FTP parameters
  • TCP port 21 closed at output
  • Domain name resolution problem: the DNS server is not specified

If the connection fails to initiate:

In this case, only the automatic connection does not work. The problem is probably caused by an incorrect schedule configuration. Please note, the schedule ID must be an integer.

 PARTICULAR APPLICATION OF THE WEBDYNRF WIRELESS M-BUS GATEWAY

For the WM-bus module data to be transmitted, you must:

  • Choose the mode corresponding to the modules used (S, T or N)
  • Define the modules or groups of modules to be processed

A module may be defined in a unique way by all the fields below:

  • Id
  • Manufacturer
  • Version
  • Medium

If a module’s data is encrypted, the encryption key for this module can be defined in the “Key” field.

To simplify the entry of the modules to be processed, a module group can be defined that conforms to the fields entered. The other fields will then be left empty (below is an example of a configuration for retrieving all Webdyn manufacturer (WDN) modules with the encryption key “00000000000000000000000000000000”.

  •   Id :
  •   Manufacturer : WDN
  •   Medium :
  •   Version :
  •   Label : Webdyn
  •   Key : 00000000000000000000000000000000

Note: In order for the modules (filters) entered to be taken into account, the “ByPass filter” mode must be deactivated.

Click here to read the media file 

Click here to read the units file 

 PARTICULAR APPLICATION OF THE WEBDYNRF WAVENIS

The tool is connected to the gateway via the installer access (install).

It is therefore necessary to use the installer password (default is “middle”), and not the administrator’s password (default is “high”)

The statuses transmitted by the WebdynRF gateway are the raw values contained in the Wavenis modules. They are transmitted without interpretation. For further details, please refer to the Coronis module manuals.

Annexes et autres documents

  • WARNING :  Pour les anciens produits qui disposent d’une carte SIM avec un code PIN à 0000 , la mise à jour vers la version 4.07.02 sera fonctionelle.

    Second cas : Si la carte SIM avec un code PIN à 0000 est utilisée dans cette version (4.07.02), le passage vers une mise à jour antérieure est interdit. 

NOTICE DE FIN DE VIE DES PRODUITS