Main Features
4G/3G/2G
USB 2.0
2x RS232
Digital input
Legacy communic
4G serial gateway
GPID management
Relay management
DynDNS No IP
MQTT/s
Modbus Datalogger
SMS control
Menu
MTX-T2 is an innovative and powerful all-in-one solution for the most demanding M2M and IoT applications that allows the transmission of high-speed data LTE / 4G / 3G / 2G, CSD and SMS. The MTX-T are programmable in Java J2ME and have a complete set of interfaces (2xRS232, mini USB, 1x digital input) avoiding the need for more hardware, shortening the time and reducing costs.
4G/3G/2G
USB 2.0
2x RS232
Digital input
Legacy communic
4G serial gateway
GPID management
Relay management
DynDNS No IP
MQTT/s
Modbus Datalogger
SMS control
| MTX-T2 4G | MTX-T2 3G | MTX-T2 2G |
|---|---|---|
| LTE 5 Bands (700, 800, 900, 1800, 2100MHz), GSM/GPRS/EDGE: 2 Bands (900, 1800MHz) | HSPA+: 5 Bands (800, 850, 900, 1900, 2100MHz), GSM/GPRS/ EDGE: 4 Bands (850, 900, 1800, 1900MHz) | GSM 4 Bands (850, 900, 1800, 1900MHz), release 6 |
| LTE Cat.1: DL 10.2Mbps, UL 5.2Mbps | HSPA (3GPP release 7): DL 7.2Mbps, UL 5.7Mbps; HSDPA Cat.8/HSUPA Cat.6 | EDGE Class 12 data rates, DL: max. 237 kbps, UL: max. 237 kbps GPRS Class 12 data rates, DL: max. 85.6 kbps, UL: max. 85.6 kbps |
| HSPA: DL 7.2Mbps, UL 5.7Mbps UMTS PS: DL 384Mbps, UL 384 Mbps, CS: DL 64Mbps, UL 64Mbps | EDGE Class 12 data rates, DL: max. 237 kbps, UL: max. 237 kbps GPRS Class 12 data rates, DL: max. 85.6 kbps, UL: max. 85.6 kbps | CSD data transmission up to 9.6 kbps, V.110, non-transparent |
| EDGE Class 12 data rates, DL: max. 237 kbps, UL: max. 237 kbps GPRS Class 12 data rates, DL: max. 85.6 kbps, UL: max. 85.6 kbps | CSD data transmission up to 9.6 kbps, V.110, non-transparent | SMS: text and PDU mode support, point-to-point MO and MT, cell broadcast |
4G/3G/2G connectivity
SIM card Interface 1.8V/3V
2xRS232
USB
1x Digital Input
Power Supply
Status LEDs
2x SMA F antenna connector: 4G
1x SMA F antenna connector: 3G/2G
Mini USB 2.0
2xDB9 F: RS232
5-way plug-in: alimentación y entrada digital
LTE/4G/3G/GPRS Serial Gateways: TCP Client, TCP Server, UDP Client / Server, acceptance of incoming CSD calls, up to two simultaneous tunnels.
GPRS Connectivity mode: Permanence 100% of the time, Low Response (SMS, missed call), change in a digital input, analog input out of levels, serial data in RS232 / 485 ports, programming of date, time and timer.
Automatic sending of data to Cervello IoT Platform
Datalogging of sensor data
RS232 / RS485 serial port datalogging
Datalogging of GPS positions (tracking or location of fleets)
Automatic data transmission to web platforms (HTTP / HTTPS, MQTT / MQTTS, FTP)
Integrated WebServer and Telnet
Remote access by webbrowser
State of analog and digital inputs
Changes in levels of digital outputs and relays
Execute AT commands remotely
Authorized telephone numbers
Firewall IP
SSL connections
GPRS session using SMS or missed call
DynDNS and NoIP service
Private DNS
SMS/MQTT alarm with changes in the level of digital inputs
SMS up to 10 remote users
Execute remote AT commands: Telnet, MQTT/MQTTs, SMS, http
Change the status of digital outputs and relays
Alias allowed
868mhz remote sensor monitoring (Wavenis)
Modbus RTU devices
Control of relays, analog and digital inputs
Access to serial devices using 2G/3G/4G and SMS
MTX-T2 is an innovative and powerful all-in-one solution for the most demanding M2M and IoT applications that allows the transmission of high-speed data LTE / 4G / 3G / 2G, CSD and SMS. The MTX-T are programmable in Java J2ME and have a complete set of interfaces (2xRS232, mini USB, 1x digital input) avoiding the need for more hardware, shortening the time and reducing costs.
4G/3G/2G
USB 2.0
2x RS232
Digital input
Legacy communic
4G serial gateway
GPID management
Relay management
DynDNS No IP
MQTT/s
Modbus Datalogger
SMS control
| MTX-T2 4G | MTX-T2 3G | MTX-T2 2G |
|---|---|---|
| LTE 5 Bands (700, 800, 900, 1800, 2100MHz), GSM/GPRS/EDGE: 2 Bands (900, 1800MHz) | HSPA+: 5 Bands (800, 850, 900, 1900, 2100MHz), GSM/GPRS/ EDGE: 4 Bands (850, 900, 1800, 1900MHz) | GSM 4 Bands (850, 900, 1800, 1900MHz), release 6 |
| LTE Cat.1: DL 10.2Mbps, UL 5.2Mbps | HSPA (3GPP release 7): DL 7.2Mbps, UL 5.7Mbps; HSDPA Cat.8/HSUPA Cat.6 | EDGE Class 12 data rates, DL: max. 237 kbps, UL: max. 237 kbps GPRS Class 12 data rates, DL: max. 85.6 kbps, UL: max. 85.6 kbps |
| HSPA: DL 7.2Mbps, UL 5.7Mbps UMTS PS: DL 384Mbps, UL 384 Mbps, CS: DL 64Mbps, UL 64Mbps | EDGE Class 12 data rates, DL: max. 237 kbps, UL: max. 237 kbps GPRS Class 12 data rates, DL: max. 85.6 kbps, UL: max. 85.6 kbps | CSD data transmission up to 9.6 kbps, V.110, non-transparent |
| EDGE Class 12 data rates, DL: max. 237 kbps, UL: max. 237 kbps GPRS Class 12 data rates, DL: max. 85.6 kbps, UL: max. 85.6 kbps | CSD data transmission up to 9.6 kbps, V.110, non-transparent | SMS: text and PDU mode support, point-to-point MO and MT, cell broadcast |
| CSD data transmission up to 9.6 kbps, V.110, non-transparent | SMS: text and PDU mode support, point-to-point MO and MT, cell broadcast | |
| SMS: text and PDU mode support, point-to-point MO and MT, cell broadcast |
4G/3G/2G connectivity
SIM card Interface 1.8V/3V
2xRS232
USB
1x Digital Input
Power Supply
Status LEDs
2x SMA F antenna connector: 4G
1x SMA F antenna connector: 3G/2G
Mini USB 2.0
2xDB9 F: RS232
5-way plug-in: alimentación y entrada digital
Webdyn © All rights reserved Contact us | Legal notice | General terms and conditions of sales | Accessibility
APPLICATION NOTES
PRODUCT END OF LIFE CYCLE
Remotely, by checking the regularly uploaded files if the product configuration is correct.
On site, by passing the magnet over the product, you will hear 3 short beeps.
Start by checking that the computer’s IP parameters are compatible with the WebdynSunPM IP address (by default 192.168.1.12)
Launch a web browser (Chrome, Firefox, Edge, Safari, etc.) and enter the WebdynSunPM concentrator IP address in the address bar. An authentication page is displayed:
The default accesses are:
| Identifiant | Mot de passe |
| userhigh | high |
Click “Login”
Enter the “ethernet” or “modem” connection type:
For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks”).
For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem”).
The parameters for the servers to be configured are at least the following:
Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”.
The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files” for more details.
Access to the FTP server depends on the selected solution.
If you have chosen a portal, it will give you the FTP server access identifiers.
If you want to use your own FTP server, contact your network administrator.
For all other configurations, and to determine the best solution, contact the Webdyn sales department which will advise you and direct you to the relevant contacts: contact@webdyn.com
Wait. The concentrator will reboot using its factory configuration.
It is possible to send commands to connected devices if they accept them.
The WebdynSunPM can store up to 50Mb of uncompressed data per declared device.
If there is no access to the remote server, the WebdynSunPM concentrator can store the data for several months.
The maximum data storage time varies depending on the amount of data to be collected and the configured collection frequency.
The average storage time varies from 3 to 4 months.
The average service life of the battery is 5 years.
It may vary depending on the installation environment.
All our products are guaranteed for 2 years.
For more information, read the general terms and conditions of sale.
The data volume depends on the exchanged files.
The average is about 5 MB per month but this varies from one installation to another.
See section 1.4: “Supported devices”.
Yes, different Modbus devices can be connected to the same serial port.
Device compatibility:
For the second case : When you insert a SIM CARD with pin code is 0000 used in this version (4.07.02) Downgrading to a previous version is not permitted.
The default accesses are:
Username: userhigh
Password: high
There are two types of configuration: via the web interface or via SMS.
Configuration of the web interface:
1/ Go to the configuration page with the gateway IP address (default 192.168.1.12)
2/ Go to the Configuration tab.
3/ Select either the Ethernet or modem connection mode:
If connecting via the local network (Ethernet):
Please note, all fields must be completed in accordance with the configuration of your local network.
If connecting via the GPRS network (Modem):
4/ Edit the FTP server parameters.
5/ Confirm the changes.
6/ Restart the WebdynSun gateway using the new settings.
7/ In the menu, click on the “installation” tab, followed by the “connection” sub-tab and start the connection.
Configuration via SMS:
This configuration method requires the use of an active SIM card with a data option and a pin code that must be either “0000” or disabled.
The SIM card must be inserted into the unit before connection to the mains supply.
After connection to the mains supply, send the following SMS messages to the number of the previously inserted SIM card:
SMS for configuring the APN:
After replacing the generic fields with those of your operator, send the following SMS*:
apn=apn_name;usr=user_name;pwd=password;
Replace the above SMS fields with the following information:
SMS for FTP configuration:
After replacing the generic fields with those of your FTP server, send the following SMS*:
Ftp=server_name:user_name:password:port;
Replace the above SMS fields with the following information:
Connection SMS:
Send the word “connect” by SMS* to launch a connection to the FTP server
*Please note: the formatting of the SMS must be exactly identical to that shown above (e.g.: no spaces between characters, etc.)
There are 2 ways of resetting the gateway.
NB : Resetting the gateway restores the configuration to its original state. Please note: data will be saved but the specific settings will not. Therefore, all the settings must be reconfigured.
Commands can be sent to connected devices with the exception of certain inverters and Modbus slaves that do not accept write requests.
If the device allows it, command files can be created on the FTP server.
The WebdynSun has a memory of about 100MB.
Therefore, if the remote server cannot be accessed, the WebdynSun gateway can backup data for several months.
The maximum data backup time varies depending on the amount of data to be collected.
The average backup time ranges from 3 to 4 months.
The average battery life is 5 years.
It may vary depending on the installation environment.
Yes, data may be sent to a PLC if the latter is equipped with a Modbus protocol.
The “Report” configuration file allows the WebdynSun gateway to automatically write the values read on a Modbus slave
All our products are guaranteed for 2 years.
For further information, please see our general conditions of sale.
Files uploaded by the WebdynSun gateway are compressed in Gz format.
The data contained in these files is structured in csv format.
The data volume depends on the files exchanged.
The average is about 5 MB per month but this varies from one installation to another.
Different brands of inverter may be connected to the RS485(B) port or via the Ethernet port if the inverter protocol is based on the Modbus protocol (RTU or TCP).
However, different brands of inverters cannot be connected to the same RS485(A) port.
Yes, any device you wish to connect must be configured and its Modbus definition file must be created.
The configuration is mainly based on the RS485 serial bus parameters and the IP parameters.
Yes, different Modbus devices can be connected to the same RS485 (B) port.
However, they must have the same communication parameters (bus parameters or compatible IP parameters), in order for them to communicate with each other.
PRODUCT END OF LIFE CYCLE
For the second case : When you insert a SIM CARD with pin code is 0000 used in this version (4.07.02) Downgrading to a previous version is not permitted.
PRODUCT END OF LIFE CYCLE
There are 2 firmware updating methods:
Local updating:
On the WebdynRF configuration interface, go to the “Actions” tab and select the updater in the “File upload” menu before clicking on the “Upload” button
Remote updating:
Upload the file containing the updater (file with extension “.bz2”) in the “BIN” directory to the FTP server . Next, place the update command in the INBOX directory corresponding to your gateway (“INBOX/”, with, the identifier of the gateway concerned)
The update command must follow the following format:
updater.tar.bz2
checksum_md5
updater.tar.bz2
checksum_md5
With:
A lack of connection to the FTP server may be due to a network connection problem (Ethernet or GPRS), an FTP login problem or a failure to initiate the connection.
If you cannot connect to the network, check the following points:
If you cannot log in, check the following points:
If the connection fails to initiate:
In this case, only the automatic connection does not work. The problem is probably caused by an incorrect schedule configuration. Please note, the schedule ID must be an integer.
For the WM-bus module data to be transmitted, you must:
A module may be defined in a unique way by all the fields below:
If a module’s data is encrypted, the encryption key for this module can be defined in the “Key” field.
To simplify the entry of the modules to be processed, a module group can be defined that conforms to the fields entered. The other fields will then be left empty (below is an example of a configuration for retrieving all Webdyn manufacturer (WDN) modules with the encryption key “00000000000000000000000000000000”.
Note: In order for the modules (filters) entered to be taken into account, the “ByPass filter” mode must be deactivated.
Click here to read the media file
Click here to read the units file
The tool is connected to the gateway via the installer access (install).
It is therefore necessary to use the installer password (default is “middle”), and not the administrator’s password (default is “high”)
There are 2 firmware updating methods:
Local updating:
On the WebdynRF configuration interface, go to the “Actions” tab and select the updater in the “File upload” menu before clicking on the “Upload” button
Remote updating:
Upload the file containing the updater (file with extension “.bz2”) in the “BIN” directory to the FTP server . Next, place the update command in the INBOX directory corresponding to your gateway (“INBOX/”, with, the identifier of the gateway concerned)
The update command must follow the following format:
updater.tar.bz2
checksum_md5
updater.tar.bz2
checksum_md5
With:
A lack of connection to the FTP server may be due to a network connection problem (Ethernet or GPRS), an FTP login problem or a failure to initiate the connection.
If you cannot connect to the network, check the following points:
If you cannot log in, check the following points:
If the connection fails to initiate:
In this case, only the automatic connection does not work. The problem is probably caused by an incorrect schedule configuration. Please note, the schedule ID must be an integer.
For the WM-bus module data to be transmitted, you must:
A module may be defined in a unique way by all the fields below:
If a module’s data is encrypted, the encryption key for this module can be defined in the “Key” field.
To simplify the entry of the modules to be processed, a module group can be defined that conforms to the fields entered. The other fields will then be left empty (below is an example of a configuration for retrieving all Webdyn manufacturer (WDN) modules with the encryption key “00000000000000000000000000000000”.
Note: In order for the modules (filters) entered to be taken into account, the “ByPass filter” mode must be deactivated.
Click here to read the media file
Click here to read the units file
The tool is connected to the gateway via the installer access (install).
It is therefore necessary to use the installer password (default is “middle”), and not the administrator’s password (default is “high”)
Second cas : Si la carte SIM avec un code PIN à 0000 est utilisée dans cette version (4.07.02), le passage vers une mise à jour antérieure est interdit.
NOTICE DE FIN DE VIE DES PRODUITS