Suchen Sie etwas anderes?
Scenario details:
- We have a device with an RS232 serial port. Internal registers need to be read and sent to a Web platform every 10 minutes
- In order to read the records, a proprietary protocol is used. This means that certain bytes of data (proprietary protocol) must be sent via the device’s serial port for it to respond with the internal registry values
- Because of this, the modem must periodically send pre-programmed bytes of data via its RS232 serial port, collect the device’s responses and, attaching a timestamp, send them to a Web server via a JSON object
- There are two pieces of data to be sent in order to be read every 10 minutes. These are:
313233F435 and 42A12B42421F4343 - The serial port configuration is 115200bps, 8 data bits, 1 stop bit and no parity
Solution: MTX-Tunnel firmware + MTX-Java-IoT/MTX-Java-T/MTX-Java-T2
EXAMPLE of settings (file config.txt) for this scenario:
| Configuration | Observations |
| COMM_baudrate: 115200 COMM_bitsperchar: 8 COMM_autocts: off COMM_autorts: off COMM_stopbits: 1 COMM_parity: none GPRS_apn: movistar.es GPRS_login: MOVISTAR GPRS_password: MOVISTAR GPRS_timeout: 0 MTX_PIN: 0000 MTX_mode: server MTX_model: MTX-4G-JAVA-IOT-STD-N MTX_TPServer: es.pool.ntp.org MTX_TPServer2: 2.europe.pool.ntp.org MTX_TPProtocol: ntp MTX_ping: 35 MTX_pingIP: 8.8.8.8 MTX_ATEmbedded: on MTX_urc: off MTX_ATLimited: off TELNET_enabled: on TELNET_login: user TELNET_password: 1234 TELNET_firewall: off TELNET_port: 20023 SMS_allPhones: on SMS_ATEnabled: on SMS_ATResponse: on LOGGER_enabled: on LOGGER_password: ID-12345678 LOGGER_server: 90.166.108.200/json/set.asp?data= LOGGER_registerSize: 600 LOGGER_numRegistersFlash: 200 LOGGER_numRegistersRam: 3 LOGGER_serverLogin: user LOGGER_serverPassword: 1234 LOGGER_serialData1: 313233F435 LOGGER_serialData2: 4141204242204343 LOGGER_serialPeriod: 600 LOGGER_ httpMode: getjson LOGGER_serialFrequency: 1 |
Serial port baud rate 8 bit data No flow control No flow control 1 stop bit No parity GPRS APN by the GSM operator GPRS Login GPRS Password MTX-Tunnel is always GPRS connected If SIM card has no PIN security, use 0000 value GPRS/serial gateway in server mode MTX-Terminal modem model used Time server (the MTX must synchronize the time) Backup time server NTP protocol used Ping every 35 minutes without comms IP address to ping To send AT commands from Web platform We don’t need URC information messages To execute any AT command To send remote commands, etc. Telnet Login Telnet Password MTX accepts connections from all IPs Telnet port All phone numbers are authorized AT commands can be sent via SMS SMS replies to AT commands Logger activated Password to be sent to the Web platform Web platform address Size of the record Number of records in flash storage Number of records in RAM memory Username of the Webserver Password of the Webserver First data to be sent Second data to be sent Data is sent every 600 secs (10 mins) Mode HTTP GET (JSON) We want to log all answers |
Details:
- The JSON object received by the server will have the following format:
{“IMEI”:353234028104337,”TS”:”08/06/14 13:39:33”,”P”:”ID-12345678”,”TYPE”:“SERIAL”,”SER”:”313233343536373839300d0a”}Where:
| IMEI | is the modem’s IMEI |
| TS | is the Timestamp (the date/time of the modem) |
| P | The password of the user |
| TYPE | JSON type |
| SER | The serial data in hexadecimal format (2 digits per byte) |
This means that for every string logged by MTX-Tunnel, a JSON object will be sent via GPRS or 3G (depending on the model of the modem) in its previous format (received by HTTP GET in the “data” variable, as can be seen in the LOGGER_server parameter).
The MTX-Tunnel will send a JSON object for every reading that is taken. IN the case of the example, 2 JSON objects will be received every 10 minutes.
Enter the “ethernet” or “modem” connection type:
For an ethernet configuration, make sure the IP parameters are compatible with server access according to the concentrator local network configuration. For an ethernet connection, the configuration must be compatible with the concentrator’s local network topology so that it can access the servers. This configuration is done from the “Networks” configuration page (see section 3.2.2.3: “Networks”).
For a modem connection, the modem configuration must be correct before a connection can be set up. This configuration is done from the “Modem” configuration page (see section 3.2.2.4: “Modem”).
The parameters for the servers to be configured are at least the following:
Therefore the following fields need to be configured: “Interface”, “Type”, “Server type”, “Address”, “Port”, “Login” and “Password”.
The other fields can be left at the default values subject to the directories having been properly created beforehand. See section 3.1.2: “Configuration files” for more details.
Wait. The concentrator will reboot using its factory configuration.
